Author: 0 (0)
Date: -0
Hello All,
Let me start by saying that once in awhile, my Falcon/CT60 will actually boot, and
then allow rebooting a few times. However, much more often than not, this does not happen.
Okay, my problem. I start my Falcon, the Falcon and CT60 both get power, but my fdd does not get checked (no light), and the hdd does not spin up. All I get on the monitor is a white blank screen. Even if I re-boot, completely power down then power up the Falcon/CT60...nada, zip, nothing but a white blank screen.
As I noted earlier, once in a awhile, everything works. Falcon/CT60 boot, the on-screen display of the CT60 info, memory count, hdd check....oh!!! What a beatiful sight!!!! Then, if I am lucky, I can reboot and see all that again!!!!! But more often then not, I'll reboot and get the white screen.
And what's really frustrating, I can't even get the hdd prepped because I can't reboot!! If I had any hair left, I would be pulling it out!! :|
I know I could send it to Rodolphe and more than likely he will be able to fix it but, given the cost of the shipping alone (I live in the U.S.A.), not to mention the distance of the round trip for Falcon mb/CT60, I have decided to leave that as the ultimate last resort.
So, I hope between all of you, you will recognize what is causing the problem, and know what the fix
is.
Thanks to each and every one of you!!!
Sam F.
Virginia U.S.A.
Atari Computer Nut
C-Lab/CT060 Falcon, 256mbTT Ram,14mbST Ram, 30Gig hdd, Magic5.0
|
Falcon/CT60 Problem new
