Author: Smeg (host213-122-31-199.in-addr.btopenworld.com)
Date: 07-22-2003 11:25
I only have 50hz refresh at the moment using a 50mhz clock. I will have to adjust it a bit to get it to go higher.
My falcon has a Powerup2 installed which is just basically a switch to use either the 16mhz combel clock, or the 32mhz clock from the xtal. I did the bus speeder mod with a 40mhz xtal, which gives me a 20mhz cpu or 40mhz cpu when the Powerup2 is switched. 4mhz might not sound a lot, but its very noticable (25% bus increase) especially with the 40mhz CPU.
I have also done the standard 50mhz DSP upgrade, and I have a 68882RC25 FPU running at 66mhz.
I removed the 40mhz videl xtal because someone gave me a screenblaster III and there are loads of clocks available now.
Smeg.
|
