Author: Metrophage (ool-43574302.dyn.optonline.net)
Date: 05-21-2004 19:27
I am guessing that most of these features you will not need in a Mega STe. You will need to specify a SCSI ID# though, and maybe termination. If this is your only SCSI device things should be easy as there are no conflicts. My experience has been that the ID pins are what they say, and you can add their values. IE: pin 4 for ID 0, pin 3 for ID 1, pin 2 for ID 2, etc. If you already have other SCSI devices, you can take note of those and choose a new ID for this drive.
Once you choose an orignal ID number, you will probably need term on. Easy enough to fgure out- try with term on and try with term off.
The other functions like delay, sync, etc are mostly for RAID systems.
At least this accounts my experience with new SCSI drives! Good luck!
|
RE: Which pins on SCSI HD? 
