Author: randy viau (ip216-239-65-98.vif.net)
Date: 02-04-2006 05:16
you must set the drive to lun 0.0 for the atari megafile to see it.
see jumpers on RLL drive.
jumper no.1 nearest to the power supply plug, is the 0.0 setting.
you can replace the st238r with a st252 or st277r this will give you 65megs
an st4086 will format to 120megs but you need a old ibm case and powersupply to run the dubble size drive.
if you can solder 10 pins (missing from the megafile board ..verry ez job. you can add another st251 or st277 or st4086 .
set second drive to lun 0.1 by setting jumper to no2 nearest to power plug on drive.
the board will handle 256megs on 2 st4086 segate hard drives. you will need an extra cable ..the small one. the larger cable must have dubble connectors. USE A BIG POWERSUPPLY 250watt or better. if using 2 drives.
RE: WANTED: megafile motherboard