Author: Phil (adsl-75-23-152-233.dsl.pltn13.sbcglobal.net)
Date: 10-29-2007 05:17
Ok, I'm not sure what you are asking, but I think I get it now.
You want to connect an external SCSI device to the BMS-200 via its 2nd DMA port, right?
If so, then it's still not a simple cable solution. :( You are going to need a second Link-type host adapter with DMA cable at the external SCSI device end.
A better (and cheaper) solution would be to get an internal 50-pin SCSI cable for 2+ SCSI devices. Then put the 2 SCSI devices in one box if there is room; otherwise, you'll need a new enclosure.
|