Author: The Paranoid (p4FF70F7F.dip0.t-ipconnect.de)
Date: 02-17-2009 17:52
There should be a resistor array for the internal SCSI
termination which might have come lose, then there is
also the chance that the ribbon cable is not fully connected.
This resistor array should be present if no external SCSI
device is in use and the internal SCSI device should be
terminated. If external SCSI devices are connected, the
resistor arrays should be removed and the (last) external
SCSI device should be terminated as well.
(Michael Ruge: Chips'n Chips, Rev. 6.00, Repairing TT030)
Also, just for the record: Which harddisk driver are you
using ?
The Paranoid
|
