Author: FatRakoon (host86-175-1-190.wlms-broadband.com)
Date: 01-14-2010 16:08
The ACSI and the SCSI Bus on the TT ARE NOT COMPATIBLE.
Please dont try to connect from one to the other. If the HD works on the ACSI port... It stays there.
Ok, so on to the SCSI Port.
Paranoid is right. pretty much all errors are going to be down to termination. A few times might be the drive itself, not every drive will work on the TT but most will allow setting of this or that. Or, indeed, as with all SCSI Devices, they need an ID number.
Let us know EXACTLY the folowing :-
1 - What Hard Disk you are trying to connect to your TT.
2 - What cable you are using
( You cannot and must not use the same cable as you are using on the ACSI )
3 - What ID you have set the Drive up as
3b- Actually, let us know what all the jumpers are set to if there are more than just the ID
And hopefully we can get a better idea of how to help you?
Thanks mate.
|
