Author: Damion Jones (host213-1-66-33.btinternet.com)
Date: 03-10-2001 17:29
I can only give you a part answer!
I used the exact same monitor on the ST.
The problem I had, was that the screen was way over to the left, which is annoyingly the same problem I have with the TT on a VGA screen.
You will lose about 3 inches from the right, and about 2 inches from the bottom, but apart from that, it should be ok!
I dont know the pinouts, as I no longer have the screen, or the notes I had, but its a simple pin for pin connection... These are the ones I had
Atari / Monitor
RED - RED
GRN - GRN
BLU - BLU
VSYNC + HSYNC ( SHORTED ) - SYNC
GROUND - GROUND
The others ( Were there any? ) were not connected.
On the tube ( THIS IS VERY, VERY DANGEROUS - EVEN STUPID ) there are a couple of Presets... Adjustment of these will bring into line, the colour scheme R,G,B with what the ST will give as opposed to what the Amiga was.
Obviously, you are talking about the Falcon, and I am talkng about the ST, so there may be a possible chance, that you will blow the monitor, the Falcon, or both, more likely yourself! - so I remove myself from responsibiliy right now! - Anything goes wrong, its nothing to do with me!
|
