Author: Robert Schaffner (pD9E268FA.dip.t-dialin.net)
Date: 01-20-2002 15:24
Bah... i posted one for an ST- Sorry .. :)
Scart Falcon
2 Audio Right
4 Audio GND 5
5 Blue GND 8
6 Audio Left
7 Blue Signal 3
8
9 Green GND 7
11 Geen Signal 2
13 Red GND 6
15 Red Signal 1
16 V-Sync 14
17 GND
20 Comp. Video 12
Connect GND also to falcon pin 18 (M1) ( monitor detect 1) Thatīs says the falcon hardware
that an rgb-display is avaiable, otherwise it wonīt work.
DO NOT CONNECT IT TO +5V / +12 OR SOME ELSE ! YOUR FALCON GET DAMAGED!
For autoswitch TV into falcon display mode connect also pin 17 falcon to pin 8 scart.
That used the +12V from falcon monitorport to activate RGB in on TV.
To also geh audio from falcon into the TV you have to build an extra cable from falcon audio port
to pin 2 (Audio Right) and pin 6 (Audio Left) on your scart plug. Use audio GND to connect falcon
audio GND to scart GND.
