FatRakoon,
I hope that you have your problems solved. Is your clock and date issues fixed as well? I have fixed a number of Falcon's just by verifying a number of known issues with setup. I will run through a small list just for peoples benefit who happen to come across this thread.
1) First and foremost make sure you the latest BIOS updates and software package.
2) Make sure you have a KNOWN SDRam module that works with the CT60 (mine is the Kingston ValueRam KVR133X64C3/512). Works well.
3) Make sure you have a known STram board that works with the CT6x. The one from Czuba Tech is good and there was a guy from poland that Rodolphe said was a very good module. I have 1 of the first and 2 of the second one and they all work very good.
4) Install the latest software for Magic and CPX's from the software package. VERY important that this is done and that the order of the stuff in the auto folder is sorted so that it boots in the proper manner.
5) Settings in the CPX have been set and are optimized for what your doing.
6) Clock patch has been removed and verified that all solders are proper.
There is plenty of other issues that I could list here. But if anyone is having an issue don't get frustrated, I can help. Drop me an e-mail. Like I have said I have helped several people to get their CT6x's to boot. Including Chris from UK, Lance, Steve and others just to name a few.
